Measurement Guide: Left Return Rhino Shelf Kit

Garage Storage Shelving - Measurement Guide

Our Measurement Guide has complete measuring instructions to determine the size you will need for a Left Return Rhino Shelf Kit

 

To download a copy of this Measurement Guide, click here. To download a copy of this Measurement Guide, click here. (572 KB)

The Left Return Model is designed to be attached to the left end of a previously installed Base Unit (either a Open End Right or Wall to Wall unit), to extend the shelf down the adjacent left wall.

First, if the Base Unit is not already installed, start at a point 33 1/2 inches out of the corner (to allow for the Base Unit).

Then, measure the available open wall space from that point to any obstruction at that height.

Measurement Guide:Left Return Rhino Shelf Extension Kit photo 1

Measurement Guide: Left Return Rhino Shelf Extension Kit photo 2

Choose the next smaller four-foot multiple length (4', 8', 12', 16', 20', 24', 28', 32' etc.) that fits within your open space. For example, if your open wall space measures 19 feet, order a 16-foot Kit. (Naturally, a 4', 8', or 12' Kit would also fit within the available space.) We will configure your kit to cover any length you specify as long as it is evenly divisible by 4.

 

 

Measurement Guide: Open-Open Rhino Shelf Kit photo 3

Note: The Left Return Extension will attach to a previously installed Open End Right or Wall to Wall Unit using the two-part Left Return Connector as shown above.

Save Save Save