Measurement Guide: Right Return Rhino Shelf Kit
Garage Storage Shelving - Measurement Guide
Our Measurement Guide has complete measuring instructions to determine the size you will need for a Right Return Rhino Shelf Kit
The Right Return Model is designed to be attached
to the right end of a previously installed Base Unit (either a Open End Left or Wall to Wall unit), to extend the shelf down the adjacent right wall.
First, if the Base Unit is not already installed, start at a point 33 1/2 inches out of the corner (to allow for the Base Unit).
Then, measure the available open wall space from that point to any obstruction at that height.
Choose the next smaller four-foot multiple length (4', 8', 12', 16', 20', 24', 28', 32' etc.) that fits within your open space. For example, if your open wall space measures 19 feet, order a 16-foot Kit. (Naturally, a 4', 8', or 12' Kit would also fit within the available space.) We will configure your kit to cover any length you specify as long as it is evenly divisible by 4.
Note: The Right Return Extension will attach to a previously installed Open End Left or Wall to Wall Unit using the two-part Right Return Assembly as shown above.